Hollow form Black Poplar Root

In the last few days i've given in a lot on turning..
I'm no longer used, i got arms quite tired...
Pieces weren't so balanced, and all these Ghost haven't make me feel so Loose...

Both are Hollow form,
the firstOne is 40 cm large in one direction 30 cm in the other, and around 18 cm high...Hole is 4 cm.
The second is 31 cm high, for 20 cm large....

Here When was in the beginning....
Had this bulb not so attached to the main body,
i couldn't make a chuck grip on this bulb, and didn't like to delete it too,
so that came the idea of make an hollow keepin'all the work on the faceplate...

After spoke with some people from "Legnofilia forum" i made some change on this piece...
I have better define the separation between the base and the jar,
and thinned the base as well...
i'm gratefull to those who took some time for give me their own impressions...

The second Hollow piece was more difficoult than the previous one,
becouse was almost all festering, with a lot of bark in and out...
Before put it on the lathe, i clean as much as i can,
used epoxy grout melt with gold and silver colours and aluminium powder to join each other the parts more dancers and frail...
I named the piece "Looking' for Land resources"...

Cheers

Paolo

Black Poplar Root

I made some works with a Root of Black Poplar...
I have pictures of just one piece, i got problem with the other...
Size is 31 cm large 16 cm high....

Bark was everywhere inside,

It's benn difficoult make a good grip for the chuck,
Inside hiding bark  make me think that it couldn't be so strong sealing...
so i dig in the poplar a 8 cm hole, deep around 10 cm too,
which was fitting the right size of a thick okume disk..
pressing the tailstock, I did the grip that allowed me to dig in with more confidence....

Had very nice turning on this Poplar root,
but i got also one that on the contrary was quite fluffy,and flew away from chuck at least 10 times...
unturnable...

Cheers
Paolo

Cedrus libani

Cedrus libani is a species of cedar native to the mountains of the Mediterranean region.
There are two distinct types of Cedrus libani that are considered to be different subspecies or varieties:

• Lebanon cedar or Cedar of Lebanon (Cedrus libani subsp. libani or var. libani) - grows in Lebanon, Palestine, Israel, northwest Jordan, western Syria, and south central Turkey.

• Turkish cedar or Taurus cedar (Cedrus libani subsp. stenocoma or var. stenocoma) - grows in southwest Turkey.

I have used for this turnin' the varieties of Libaniit
Was cut around February 2013,

have lost a lot of weight during spring-summer,

but still around 45 kg when i put on lathe. 

i never did so big turn till now,i was scared, 

couldn't know what speed to start it, 

or how many screws I should have put, 

how long screws must be to be save...

I used around 12 screws 3 cm deep inside Wood,and tailstock well pressed.

it was not regular cut, unBalanced..so to start speed was around 150 rpm

The bark was quite attached,

but after a while a big piece came off 

hit me right in the forehead..

Fortunatly i had Helmet with visor...

i decided to take it out completly 

Smell was incredibly good, but stinging

i ain't sand any paper on lathe on,

becouse it seem to me cedar get too hot easily 

 and then begin to cracking

The day after i spend almost four hours just to sand starting from 120 till 320...

brushing with some straw oil just to take out its colours.. 

at the end is 51 cm diameter for 26 cm tall,
Some parts ain chipped,
and i like the idea to have rough top,
becouse nowadays i found a really very well WoodTurner named John Hodgson from Scotland...
i really admire his kind of turning....
here the link to his website

http://www.john-hodgson.co.uk/

Cheers

Paolo